pod
Other formats agents might prefer:
markdownjsonllms.txt

Agent? You probably want markdown or json, or Pod over MCP.

Reported issues for postgres-scout-mcp

Pod holds 16 of 17 problems reported by people outside the maintainer team. Issues filed by the project's own owners, members and collaborators are excluded entirely — a maintainer's release checklist is not a warning to a prospective user.

Back to postgres-scout-mcp.

Most discussed

Make file logging opt-in instead of default

Problem

The Logger in postgres-scout-mcp always creates a ./logs directory and writes log files to disk by default. In contrast, mongo-scout-mcp uses an ENABLE_LOGGING environment variable that defaults to false, making file logging opt-in.

Expected Behavior

File logging should be opt-in via ENABLE_LOGGING=true environment variable, matching the pattern used in mongo-scout-mcp.

Current Behavior

  • Logger constructor unconditionally creates the log directory
  • Every log() c

Read the thread · 2026-03-07 · closed · 0 comments

DDL operations unrestricted in read-write mode

Summary

Read-write mode allows all DDL operations (CREATE, ALTER, DROP, TRUNCATE) via executeQuery with no additional confirmation or restriction.

Affected Files

  • src/utils/sanitize.ts — ALLOWED_READ_WRITE_OPERATIONS (lines 4-9)

Problem

Read-write mode is intended for safe data modifications (INSERT, UPDATE, DELETE with guards). However, it also allows destructive DDL like DROP TABLE, TRUNCATE, and ALTER TABLE through the general executeQuery tool, without the safety

Read the thread · 2026-02-28 · closed · 0 comments

Log injection via unsanitized tool arguments

Summary

Tool names and arguments are logged without sanitization, allowing control characters and newlines to pollute or forge log entries.

Affected Files

  • src/server/setup.ts — line 51: logger.info('mcp', \Tool called: ${name}`, { args })`
  • src/utils/logger.ts

Problem

If tool arguments contain newlines or control characters, they are written directly to log files. This could be used to forge log entries or mask malicious activity in the audit trail.

Suggested Fix

St

Read the thread · 2026-02-28 · closed · 0 comments

No server-side cap on maxRows for mutation tools

Summary

The maxRows parameter in safeUpdate and safeDelete is fully controlled by the MCP client with no server-side upper bound.

Affected Files

  • src/tools/mutations.ts — SafeUpdateSchema (line 28), SafeDeleteSchema (line 38)

Problem

The maxRows parameter defaults to 1000 but can be set to any number by the agent. There is no server-enforced maximum. An agent can pass maxRows: 999999999 to effectively disable the safety guard.

Suggested Fix

Add a server-side m

Read the thread · 2026-02-28 · closed · 0 comments

Rate limiting disabled by default

Summary

Rate limiting is disabled by default, providing no protection against rapid-fire tool calls.

Affected Files

  • src/config/environment.ts — line 42: enableRateLimit: process.env.ENABLE_RATE_LIMIT === 'true'

Problem

The rate limiter exists but defaults to off. Without rate limiting, there is no throttling of tool invocations, making it easier to abuse expensive operations or amplify other vulnerabilities.

Suggested Fix

Enable rate limiting by default. Users who need h

Read the thread · 2026-02-28 · closed · 0 comments

Information disclosure via unfiltered error messages

Summary

PostgreSQL error messages are returned directly to the MCP client without sanitization, potentially leaking internal schema details.

Affected Files

  • src/server/setup.ts — error handler (lines 66-82)
  • src/utils/database.ts — query error logging (lines 85-92)

Problem

When queries fail, the raw PostgreSQL error message is forwarded to the client. These messages often contain table names, column types, constraint names, query fragments, and internal database state that ca

Read the thread · 2026-02-28 · closed · 0 comments

Connection pool exhaustion via parallel queries in findDuplicates

Summary

findDuplicates with includeRows=true (the default) fires unbounded parallel queries that can exhaust the connection pool.

Affected Files

  • src/tools/data-quality.ts — findDuplicates() (lines 94-119)

Problem

When includeRows=true, the tool uses Promise.all() to fire a query for each duplicate group simultaneously. With the default limit=100, up to 100 concurrent queries are fired against a pool that defaults to 10 connections. This blocks all other database ope

Read the thread · 2026-02-28 · closed · 0 comments

Always-true WHERE clause bypass in mutation protection

Summary

The normalizeWhereForSafety() function in mutation tools can be tricked into failing to detect always-true WHERE clauses, bypassing the allowEmptyWhere protection.

Affected Files

  • src/tools/mutations.ts — normalizeWhereForSafety() (lines 41-49), validateWhereClause() (lines 52-75)

Problem

The normalization strips matching outer parentheses iteratively, then checks against a small set of known always-true patterns (1=1, true, empty string). Logically equivalen

Read the thread · 2026-02-28 · closed · 0 comments

Most recent

SQL injection via condition parameter in checkConstraintViolations

Summary

The condition parameter in checkConstraintViolations is validated by validateCondition() which uses the same insufficient denylist as WHERE clause validation, then interpolated directly into SQL.

Affected Files

  • src/tools/data-quality.ts — checkConstraintViolations() (lines 350-355)
  • src/utils/sanitize.ts — validateCondition() (lines 136-154)

Problem

validateCondition() applies the same limited WHERE_DANGEROUS_PATTERNS denylist. The validated string is t

Read the thread · 2026-02-28 · closed · 0 comments

optimizeQuery ignores read-only ANALYZE restriction

Summary

The optimizeQuery tool always runs EXPLAIN (ANALYZE, ...) regardless of the server mode, bypassing the read-only protection that explainQuery correctly enforces.

Affected Files

  • src/tools/optimization.ts — optimizeQuery() (line 973)
  • Compare with src/tools/query.ts — explainQueryTool() (lines 54-56) which correctly forces analyze=false

Problem

explainQueryTool checks connection.config.mode and forces analyze=false in read-only mode. optimizeQuery h

Read the thread · 2026-02-28 · closed · 0 comments

SQL injection via raw SET string in safeUpdate

Summary

When allowRawSet=true, the SET clause in safeUpdate is directly interpolated into the UPDATE query with no sanitization or parameterization.

Affected Files

  • src/tools/mutations.ts — safeUpdate() (lines 261-265)

Problem

When set is a string and allowRawSet=true, the value is assigned directly to setClause and embedded in the UPDATE query. No validation, escaping, or parameterization is applied to the string content.

While this is opt-in (disabled by default),

Read the thread · 2026-02-28 · closed · 0 comments

SQL injection via WHERE clause parameters across multiple tools

Summary

The where parameter accepted by multiple tools is validated using a denylist of regex patterns, then string-interpolated directly into SQL queries. The denylist is insufficient and allows several classes of injection.

Affected Files

  • src/utils/sanitize.ts — validateUserWhereClause() (lines 111-134)
  • src/tools/mutations.ts — previewUpdate, previewDelete, safeUpdate, safeDelete
  • src/tools/export.ts — exportTable, generateInsertStatements
  • `src/tools/tempo

Read the thread · 2026-02-28 · closed · 0 comments

Read-only mode bypass via CTE with writable main statement

Summary

The read-only mode enforcement in sanitizeQuery() can be bypassed when using CTEs (Common Table Expressions) combined with data-modifying main statements.

Affected Files

  • src/utils/sanitize.ts — sanitizeQuery() function (lines 42-74)

Problem

The operation check only inspects the first keyword of the query. When a query starts with WITH, it is allowed in read-only mode. The CTE_DATA_MODIFYING_PATTERN only checks the CTE body, not the main statement that follows. T

Read the thread · 2026-02-28 · closed · 0 comments

Parameter validation and documentation gaps

Weaknesses

Parameter validation inconsistencies:

  • getHealthScore accepts nonexistent database names without error
  • Some enum values aren't intuitive (had to guess cache not cache_hit_ratio)

Missing pg_stat_statements dependency - getSlowQueries fails silently without the extension

Documentation gaps - Had to discover valid enum values through trial and error

Row estimates show -1 - listTables shows rowEstimate: -1 for all tables (needs ANALYZE)

Verdict

Solid tool for data

Read the thread · 2025-12-22 · closed · 0 comments

Document safeUpdate raw SET opt‑in (allowRawSet) in tool metadata and README

We introduced allowRawSet to make safeUpdate reject raw SET strings by default. This is a backward‑compatibility change for clients that previously passed a string set. Update the MCP tool description and README examples to clearly indicate that raw SET strings now require allowRawSet=true. This helps agents and users understand the new safety behavior and avoid unexpected errors.

Read the thread · 2025-12-22 · closed · 0 comments

Security: Prevent data-modifying statements within Common Table Expressions (CTEs)

Background The sanitizeQuery utility checks the first word of a query to ensure it is an allowed operation (e.g., SELECT, WITH). It also checks for semicolons followed by dangerous patterns to prevent multiple statements.

The Problem PostgreSQL allows data-modifying statements (INSERT, UPDATE, DELETE) inside WITH clauses (CTEs). A query like:

WITH deleted AS (DELETE FROM users RETURNING *) SELECT * FROM deleted;

[Read the thread](https://github.com/bluwork/postgres-scout-mcp/issues/4) · 2025-12-20 · closed · 0 comments

The remaining reports are on [the project's issue tracker](https://github.com/bluwork/postgres-scout-mcp/issues).